Schlage BE479AA V CEN 619 Installation Guide download pdf (Page 6)

ENGLISH

CLEANING THE LOCK

In order to properly clean the touchscreen from build-up of dirt, oils, or other

contaminates; you should use a mild dish soap with warm water and follow the

general rules below:

• Do rinse the touchscreen with warm water prior to cleaning process.

• Do follow the application of soap with a damp, lukewarm cloth

• Don’t use abrasives, high alkaline cleaners, or gasoline

• Don’t leave cleaners on touchscreen for long periods, wash immediately.

• Don’t apply cleaners in direct sunlight or at elevated temperatures.

• Don’t use scrapers, squeegees or razors.

The bolt itself can be cleaned using a mild dish soap and warm water. This can help

improve decreased performance.

REPLACING THE BATTERIES

Replace the batteries in your lock at the same time each year that you test and

replace the batteries in your smoke alarms. This will ensure continued reliable

operation.

Use four high-quality alkaline AA batteries for replacement.

WARNING

ELECTROSTATIC DISCHARGE

DO NOT TOUCH the circuit

board! You may damage the lock.

1. Remove the inside cover. 2. Unsnap the battery

connector, remove

the battery tray and

replace the batteries.

3. Replace the battery

tray with the batteries

facing the door. Snap

the battery connector to

the tray and replace the

cover.

Lithium Batteries?

Lithium batteries may have a longer life, but when they begin to fail, they

fail quickly. We don’t recommend them because they don’t give you a

lot of time to change your batteries before the lock is completely dead.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Schlage BE479AA V CEN 619 Installation Guide Page 6